Why does an industrial dehydrator dry cleaning machine dry slowly?

2025-04-16 11:13:16

The dry cleaning machine usually takes 40-50 minutes to dry, but now it takes more than an hour, mainly due to the following reasons: Industrial dewatering machine, water washing equipment

1. The button collector is too dirty. The button collector is too dirty, causing blockage. When it is shaken dry, the liquid is not completely removed, resulting in the solvent remaining in the drum being evaporated by extending the drying process. So after washing each car, the button collector should be checked and cleaned.

2. The belt is loose. This situation is rare. If the belt is loose or damaged, the speed will decrease during high detachment, resulting in incomplete spin drying and prolonged drying time. Industrial dewatering machine, water washing equipment

3. The clothing is too heavy. When washing clothes, the folding and double layered areas will be soaked, and the folding and inner layers of large and thick clothes are less likely to dry. When washing a cart of large and heavy clothes, the loading capacity should be less than 80% of the recommended amount. This ratio should vary with the size and weight of the clothing.

4. The fluff collector is blocked. The fluff collector is not clean or blocked, and the hot air cannot circulate properly during drying, which affects the drying efficiency. It is recommended to clean every 2-3 vehicles.

5. The pressure of steam heating is low and the amount of steam is small. Industrial dewatering machine, water Washing equipment

6. Overloading. A normal load of clothing, including tops, pants, coats, skirts, etc., should not exceed 85% of the capacity (generally observed should not exceed 80% of the drum capacity), nor should it be less than 50% of the capacity (generally observed should not be less than 50% of the drum capacity).

7. There is a problem with the heating tube, resulting in less heat generation and affecting the drying time. Industrial dewatering machine, water washing equipment

8. When the temperature of the cooling water is too high, especially when the ambient temperature is relatively high, attention should be paid to changing the water frequently.