When the industrial Dehydrator malfunctions, we always have to dismantle the inner cylinder ourselves for inspection. So how do we dismantle the inner cylinder of the industrial dehydrator ourselves? The seemingly simple inner cylinder structure may seem complicated when dismantled by oneself. Let's take a look at the steps involved.
1. Firstly, we need to remove and tighten the screws at the outer cylinder (usually around 5-6 in quantity), and then remove the casing of the Industrial dewatering machine.
2. Remove the spindle cover and unscrew the reverse teeth and tighten the screw at the spindle connection clockwise to remove it.
3. Finally, use the corresponding lifting tools to lift it out.
4. After the problem is resolved, we can proceed in reverse order to install the inner cylinder and tighten it properly to avoid shaking and displacement issues.
5. When disassembling the industrial dehydrator, if there is a problem of not being able to unscrew or remove it, we may add lubricating oil to its screws instead of heavy impact to avoid damaging the spindle. At the same time, after disassembly, the wear and oil stains of the main shaft gear, starting flange seat, starting assembly and other components should be observed, and corresponding cleaning or replacement operations should be carried out according to the specific situation, and appropriate maintenance work should be done for other components.
These are the steps our company provides for everyone to disassemble the inner cylinder of an industrial dehydrator. We remind everyone to pay attention to safety when disassembling both industrial dehydrators and Industrial Washing Machines.
Phone
Comment
（0）