The weight of centrifugal Dehydrators, ranging from a few to several thousand pounds, is difficult for us to handle manually. Moreover, many times, if the centrifugal dehydrator is lifted and installed due to negligence, it not only brings certain troubles to subsequent use, but also poses certain safety hazards. Okay, now let me introduce the lifting and installation specifications and methods of Centrifugal dewatering machines. Industrial dewatering machine, water washing equipment
Lifting of centrifugal dewatering machineFor dehydrators weighing over 1000 pounds, we should use tower cranes, forklifts, and other transportation tools when lifting them into the middle. Do not use manual handling due to sufficient manpower resources. At the same time, to avoid overloading the installation ground, we should also prepare sleepers, I-beams, and other tools during lifting to avoid accidents. If moving the centrifugal dewatering machine on the ground, we should try to use steel rails or other tools to slowly move it. At the same time, the entire process should adhere to the principle of handling with care to prevent the centrifugal dewatering machine from causing significant collisions. Industrial dewatering machine, water washing equipment
Installation of centrifugal dewatering machine
1. In order to ensure the safety and stability of the entire machine, the installation ground of the centrifugal dewatering machine should be a concrete pouring ground, and its position should be selected to reserve a distance of 80-100 centimeters from the surrounding area for the convenience of subsequent maintenance. In order to ensure the maximum efficiency of the centrifugal dewatering machine, its power supply should be a 380V centrifugal power supply to prevent weak centrifugal dewatering machine speed caused by insufficient voltage.
2. The allowable deviation for the plane position and elevation of the positioning reference line, line, and point on the centrifugal dehydration mechanism is: ± 5mm for plane position, ± 5mm for elevation, and 0.1mm for horizontal levelness and 0.05% for vertical levelness when the unit is leveled. If the difference data exceeds the above mentioned, please adjust the fastening bolts accordingly.
3. In order to avoid the problem of large vibration during the subsequent use of the centrifugal dewatering machine, we should use fastening bolts to fully match its base with the ground during installation. At the same time, we can also pour concrete on the three legs. Due to the large amount of wastewater discharged during dehydration work, in order to ensure the smoothness of wastewater discharge, the diameter of the pipeline buried on the ground should be less than 60 centimeters. Industrial dewatering machine, water Washing equipment
4. From this perspective, there are still many issues that we need to consider in order to truly implement the scientific lifting and installation of seemingly simple centrifugal dewatering machines. So I would like to remind everyone not to do things casually when carrying out corresponding operations. Because our carelessness not only affects the normal use of the centrifugal dewatering machine in the future, but also to some extent damages the service life of the centrifugal dewatering machine, posing a certain safety hazard to our production. Industrial dewatering machine, water washing equipment
Phone
Comment
（0）